RAV4PartsField guide
RAV4 cross-market identification · gasoline · hybrid · FWD · AWDInternational B2B inquiry · no retail checkout
Rear differential carrier housing with input flange and axle outputs technical identification illustration for a Toyota RAV4 wholesale inquiry

Transmission and Driveline · decision page

Toyota RAV4 Rear Differentials

Rear drive units vary between mechanical and electrified AWD architectures. A housing photo without drivetrain evidence is not enough for quotation.

Decision matrix

Keep these checks on the same RFQ line.

Every field should describe the specific requested item, not merely the vehicle family.

Drive architectureState gasoline AWD, hybrid AWD or plug-in configuration and production period.
IdentificationSend housing label, casting marks, stamped code and donor-vehicle record.
InterfacesDocument propeller flange, axle outputs, connectors, breathers and mount points.
Supply scopeDefine bare housing, complete carrier, actuator, mounts, oil and packing.

Reference evidence gate

Confirm the installed RAV4 rear differential before assigning an OE number.

No OE number is published on this page because the reviewed public sources did not safely resolve every market, build-location, powertrain and production split.

Evidence stateRequired next step
UNRESOLVEDSend VIN/model code where lawful, production date, installed-part label or casting, connector and measured interface. A candidate reference must be confirmed in writing before quotation.
!

Do not assume interchangeability

Never infer ratio or internal specification from bolt count alone, and do not mix hybrid rear drive units with conventional differentials.

Request scope

Write the included components explicitly.

Similar buyer terminology can describe a different kit, side, finish or packing scope.

01

Conventional AWD differential

For the conventional awd differential line, document drive architecture: State gasoline AWD, hybrid AWD or plug-in configuration and production period. Add required quantity, included hardware, packing and destination.

02

Electrified rear drive unit

For the electrified rear drive unit line, document identification: Send housing label, casting marks, stamped code and donor-vehicle record. Add required quantity, included hardware, packing and destination.

03

Carrier assembly

For the carrier assembly line, document interfaces: Document propeller flange, axle outputs, connectors, breathers and mount points. Add required quantity, included hardware, packing and destination.

Continue the buying path

Verify the application, then compare related lines.

Return to the complete system index, prepare a stronger evidence pack, compare an adjacent request line or continue to a matching POPXA company catalogue page where one exists.

Buyer questions

RAV4 rear differential identification.

Use these answers to prepare a clearer first request.

Is a Toyota RAV4 model year enough to quote rear differential?

No. Send the production period, market, powertrain or drivetrain evidence and the part-specific checks listed on this page.

What should a wholesale RAV4 rear differential RFQ include?

Record drive architecture, identification, interfaces, supply scope together with quantity, packing, destination port and the preferred Incoterm.

Why is no RAV4 rear differential OE number published here?

The reviewed public evidence did not safely resolve all market, build-location, powertrain and production splits. Send the installed-part and vehicle evidence so a candidate reference can be checked before quotation.

Build a traceable request

Send a RAV4 parts field list.

Include vehicle generation or production period, market, engine or hybrid designation, drivetrain, part reference or photos, position, quantity, packing and destination. A listing is not automatic fitment or availability confirmation.

WhatsAppSend RFQ