RAV4PartsField guide
RAV4 cross-market identification · gasoline · hybrid · FWD · AWDInternational B2B inquiry · no retail checkout
Electric parking brake motor with geared housing and sealed connector technical identification illustration for a Toyota RAV4 wholesale inquiry

Braking · decision page

Toyota RAV4 Parking Brake Actuators

Electric parking-brake motors are side and caliper dependent. The actuator, caliper mechanism and connector should be documented together.

Decision matrix

Keep these checks on the same RFQ line.

Every field should describe the specific requested item, not merely the vehicle family.

System typeConfirm electric parking brake rather than cable-operated hardware.
Side and caliperState rear left or right and provide caliper casting or assembly reference.
Electrical interfacePhotograph connector keying, pin cavity and housing label.
Included scopeDefine motor only, gear housing, seal, screws or complete caliper assembly.

Reference evidence gate

Confirm the installed RAV4 parking brake actuator before assigning an OE number.

No OE number is published on this page because the reviewed public sources did not safely resolve every market, build-location, powertrain and production split.

Evidence stateRequired next step
UNRESOLVEDSend VIN/model code where lawful, production date, installed-part label or casting, connector and measured interface. A candidate reference must be confirmed in writing before quotation.
!

Do not assume interchangeability

Do not energize an unknown actuator on the bench or mix left and right units because the housing, drive and calibration context may differ.

Request scope

Write the included components explicitly.

Similar buyer terminology can describe a different kit, side, finish or packing scope.

01

Left rear actuator

For the left rear actuator line, document system type: Confirm electric parking brake rather than cable-operated hardware. Add required quantity, included hardware, packing and destination.

02

Right rear actuator

For the right rear actuator line, document side and caliper: State rear left or right and provide caliper casting or assembly reference. Add required quantity, included hardware, packing and destination.

03

Motor and gear housing

For the motor and gear housing line, document electrical interface: Photograph connector keying, pin cavity and housing label. Add required quantity, included hardware, packing and destination.

Continue the buying path

Verify the application, then compare related lines.

Return to the complete system index, prepare a stronger evidence pack, compare an adjacent request line or continue to a matching POPXA company catalogue page where one exists.

Buyer questions

RAV4 parking brake actuator identification.

Use these answers to prepare a clearer first request.

Is a Toyota RAV4 model year enough to quote parking brake actuator?

No. Send the production period, market, powertrain or drivetrain evidence and the part-specific checks listed on this page.

What should a wholesale RAV4 parking brake actuator RFQ include?

Record system type, side and caliper, electrical interface, included scope together with quantity, packing, destination port and the preferred Incoterm.

Why is no RAV4 parking brake actuator OE number published here?

The reviewed public evidence did not safely resolve all market, build-location, powertrain and production splits. Send the installed-part and vehicle evidence so a candidate reference can be checked before quotation.

Build a traceable request

Send a RAV4 parts field list.

Include vehicle generation or production period, market, engine or hybrid designation, drivetrain, part reference or photos, position, quantity, packing and destination. A listing is not automatic fitment or availability confirmation.

WhatsAppSend RFQ